الماركة: TURBOSOUND
نموذج: M10
Turbosound M10 - 600 Watt 2 Way 10" Full Range Powered Loudspeaker with Klark Teknik DSP Technology for Portable PA and Installation Applications
أداة العثور على المتجر
The 600-Watt full range MILAN M10 is a portable 10" two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.
Designed for both portable and permanent install applications, the M10's discrete inputs are each equipped with balanced, combination ¼ " jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.
The 600-Watt full range MILAN M10 is a portable 10" two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.
Designed for both portable and permanent install applications, the M10's discrete inputs are each equipped with balanced, combination ¼ " jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.
| Model |
| Components:1 x 10" LF driver |
| 1 x 1" HF driver |
| Connectors:Mic/Line input: combo jack/female XLR wired pin 2 hot |
| Mix out: male XLR wired pin 2 hot |
| IEC mains connector with integrated fuseholder |
| Controls |
| Controls:Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off |
| System Data |
| Frequency Range:55 Hz–18 kHz ±3 dB |
| 50 Hz–20 kHz -10 dB |
| Dispersion @-6 dB pts:90° H x 60° V |
| Max SPL (peak):126 dB |
| Equalisation:Bass: ±6 dB @ 80 Hz |
| Treble: ±6 dB @ 12 kHz |
| Boost Frequency:N/A |
| Indicators |
| Power LED:Blue |
| Signal LED:Green |
| Limit LED:Red |
| Clip LED:Red |
| Circuit Protection |
| Amplifier Protection:Full short circuit, open circuit, thermal |
| LF/HF Driver |
| Max Output Power:LF: 500 W HF: 100 W |
| Audio Inputs |
| Input Sensitivity:Mic: -32 dBu; Line: -2 dBu |
| Input Impedance:Mic: 560 O unbalanced, 1 kO balanced; Line: 20 kO unbalanced, 40 kO balanced |